Product TOP
Product lineup capable of measuring up to 205 mm.
The robust structure creates superior environmental resistance and rigidity, and is able to be used in a wide range of applications.
- Measuring range : 10 mmm, 25 mm, 50 mm, 100 mm, 155 mm, 205 mm
- Maximum Resolution : 0.5 μm
- Accuracy : 2 μm p-p to 6 μm p-p (depends on the model)
- Dustproof, dripproof, and oilproof construction. Good environmental resistance. (P type)
- High measuring force (DK10/25/50/100P type) : 4.9 N to 9.3 N (depends on the model)
- Low measuring force (DK10/25/50/100N type) : 0.3 N to 2.7 N (depends on the model)
- Measurement can be performed by adsorbing it to the moving table with the attached magnetic adsorption type feeler (DK155/205).
- Built-in reference point
- Output signal: A/B/reference point (voltage-differential line driver output)
Specifications
| Specifications | ||||
|---|---|---|---|---|
|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual. *2 The mass indicated is the total mass excluding the cable and interpolation box. Magnescale reserves the right to change product specifications without prior notice. |
||||
| Model | DK10NR5 | DK10PR5 | DK10PLR5 | |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |||
| Maximum resolution*1 | 0.5 μm | |||
| Measuring range | 10 mm | |||
| Accuracy (at 20 °C) | 2 μm | |||
| Measuring force (at 20 °C) | Upward | 0.3 ±0.25 N | 4.9 N or less | |
| Horizontal | 0.6 ±0.3 N | 4.9 N or less | ||
| Downward | 0.8 ±0.35 N | 4.9 N or less | ||
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
| Maximum response speed | 250 m/min | |||
| Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | |||
| Impact resistance | 1,500 m/s2 (11 ms) | |||
| Protection grade | IP50 | IP64 | ||
| Operating temperature | 0 to +50 °C | |||
| Storage temperature | −20 to +60 °C | |||
| Power supply | DC +5 V ±5 % | |||
| Power consumption | 1 W or less | |||
| Output cable length | Approx. 2.5 m | |||
| Stem diameter | φ20 0‒0.013mm | |||
| Mass*2 | Approx. 230 g | |||
| Feeler | DZ-122 : carbide ball tip, mounting screw M2.5 | |||
| Accessories | +P M4x5 screw (2 pcs.), instruction manual | |||
| Specifications | |||||
|---|---|---|---|---|---|
|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual. *2 The mass indicated is the total mass excluding the cable and interpolation box. Magnescale reserves the right to change product specifications without prior notice. |
|||||
| Model | DK25NR5 | DK25PR5 | DK25NLR5 | DK25PLR5 | |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | ||||
| Maximum resolution*1 | 0.5 μm | ||||
| Measuring range | 25 mm | ||||
| Accuracy (at 20 °C) | 2 μm p-p | ||||
| Measuring force (at 20 °C) | Upward | 0.4 ±0.3 N | 4.9 N or less | 0.4 ±0.3 N | 4.9 N or less |
| Horizontal | 0.7 ±0.35 N | 4.9 N or less | 0.7 ±0.35 N | 4.9 N or less | |
| Downward | 1 ±0.4 N | 4.9 N or less | 1 ±0.4 N | 4.9 N or less | |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | ||||
| Maximum response speed | 250 m/min | ||||
| Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | ||||
| Impact resistance | 1,500 m/s2 (11 ms) | ||||
| Protection grade | IP50 | IP64 | IP50 | IP64 | |
| Operating temperature | 0 to +50 °C | ||||
| Storage temperature | −20 to +60 °C | ||||
| Power supply | DC +5 V ±5 % | ||||
| Power consumption | 1 W or less | ||||
| Output cable length | Approx. 2.5 m | ||||
| Stem diameter | φ20 0‒0.013mm | ||||
| Mass*2 | Approx. 300 g | ||||
| Feeler | DZ-122 : carbide ball tip, mounting screw M2.5 | ||||
| Accessories | +P M4x5 screw (2 pcs.), instruction manual | ||||
| Specifications | |||
|---|---|---|---|
|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual. *2 The mass indicated is the total mass excluding the cable and interpolation box. Magnescale reserves the right to change product specifications without prior notice. |
|||
| Model | DK50NR5 | DK50PR5 | |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | ||
| Maximum resolution*1 | 0.5 μm | ||
| Measuring range | 50 mm | ||
| Accuracy (at 20 °C) | 2 μm p-p | ||
| Measuring force (at 20 °C) | Upward | – | 6.2 N or less |
| Horizontal | 0.9 ±0.4 N | 6.2 N or less | |
| Downward | 1.3 ±0.5 N | 6.2 N or less | |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | ||
| Maximum response speed | 250 m/min | ||
| Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | ||
| Impact resistance | 1,500 m/s2 (11 ms) | ||
| Protection grade | IP50 | IP64 | |
| Operating temperature | 0 to +50 °C | ||
| Storage temperature | −20 to +60 °C | ||
| Power supply | DC +5 V ±5 % | ||
| Power consumption | 1 W or less | ||
| Output cable length | Approx. 2.5 m | ||
| Stem diameter | φ20 0‒0.013mm | ||
| Mass*2 | Approx. 360 g | ||
| Feeler | DZ-122 : carbide ball tip, mounting screw M2.5 | ||
| Accessories | +P M4x5 screw (2 pcs.), instruction manual | ||
| Specifications | |||
|---|---|---|---|
|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual. *2 The mass indicated is the total mass excluding the cable and interpolation box. Magnescale reserves the right to change product specifications without prior notice. |
|||
| Model | DK100NR5 | DK100PR5 | |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | ||
| Maximum resolution*1 | 0.5 μm | ||
| Measuring range | 100 mm | ||
| Accuracy (at 20 °C) | 4 μm | ||
| Measuring force (at 20 °C) | Upward | – | 9.3 N or less |
| Horizontal | 1.8 ±0.65 N | 9.3 N or less | |
| Downward | 2.7 ±0.55 N | 9.3 N or less | |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | ||
| Maximum response speed | 250 m/min | ||
| Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | ||
| Impact resistance | 1,500 m/s2 (11 ms) | ||
| Protection grade | IP50 | IP64 | |
| Operating temperature | 0 to +50 °C | ||
| Storage temperature | −20 to +60 °C | ||
| Power supply | DC +5 V ±5 % | ||
| Power consumption | 1 W or less | ||
| Output cable length | Approx. 2.5 m | ||
| Stem diameter | φ20 0‒0.013mm | ||
| Mass*2 | Approx. 630 g | ||
| Feeler | DZ-121 : carbide ball tip, mounting screw M2.5 | ||
| Accessories | +P M4x5 screw (2 pcs.), instruction manual | ||
| Specifications | ||
|---|---|---|
|
*1 The resolution setting needs to be made when connecting to the LT30 series, MG series, and LY70 series. For details, please refer to the respective instruction manual. Magnescale reserves the right to change product specifications without prior notice. |
||
| Model | DK155PR5 | DK205PR5 |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |
| Maximum resolution*1 | 0.5 μm | |
| Measuring range | 155 mm | 205 mm |
| Accuracy (at 20 °C) | 5 μm p-p | 6 μm p-p |
| Reference point | at 5 mm ±0.5 mm position of spindle movement | |
| Maximum response speed | 250 m/min | |
| Vibration resistance | 150 m/s2 (10 to 2,000 Hz) | |
| Impact resistance | 1,500 m/s2 (11 ms) | |
| Protection grade | IP64 | |
| Operating temperature | 0 to +50 °C | |
| Storage temperature | -20 to +60 °C | |
| Power supply | DC +5 V ±5 % | |
| Power consumption | 1 W or less | |
| Cable length | Approx. 2.5 m | |
| Stem diameter | φ32 (0 to 0.05) mm | |
| Mass*2 | Approx. 1,100 g | Approx. 1,300 g |
| Surface to be measured | Soft magnetic material | |
| Magnetically attachable feeler | Magnetic attraction : 10 N, resistance against horizontal slip : 2.7 N Provided with φ4 mm carbide ball tip | |
| Spindle*3 | Spindle φ8 mm, radial swing : max.0.04 mm | |
| Output cable length (up to the electronic section) |
22 m max. | |
| Accessories | +P M4x5 screw (2 pcs.), instruction manual | |
Accessory
DK10/25/50/100/155/205
Feeler
| DZ-100 |  |
Roller feeler for DK10/25/50/100 |
| DZ-121 |  |
Φ2.5 mm carbide ball tip feeler for DK100 |
| DZ-122 |  |
Φ2.5 mm carbide ball tip feeler for DK10/25/50 |
| DZ-123 |  |
Φ3 mm carbide ball tip feeler for DK10/25/50/100 |
| DZ-191 |  |
Coupling feeler for DK10/25/50/100 |
| DZ-5100 |  |
Feeler set for DK10/25/50/100 (pin, off-center, carbide flat, plastic spherical) for DK10/25/50/100 |
| DZ-181 |  |
Magnetically attachable feeler for DK155/205 |
Air lifter
| DZ174-010 DZ174-025 DZ174-050 |
 |
Air Lifter for DK10/25/50 (Air push type) |
Lift lever
| DZ-161 |  |
Lift lever for DK10/25/50/100 (To allow manual sliding, this is mounted between the spindle and the feeler.) |
Extension cable
| CE08-1, 3, 5, 10, 15 | Extension cable for LT series / MG series (1, 3, 5, 10, 15 m) | |
| CK-T12, 13, 14, 15, 16 | Flex-resistant extension cable for LT series / MG series (1, 3, 5, 10, 15 m) | |
| CE29-003, 01, 03, 05, 10 | Extension cable for LY series counter (0.3, 1, 3, 5, 10 m) | |
| CE22-01,03,05,10 | Flex-resistant extension cable for bare wires (1, 3, 5, 10 m) | |
Catalog
| DK Series | Japanese |  |
|---|---|---|
| DK Series | English | |