Product TOP
Interface unit for DK800S, DK and DT series.
The data from the measuring unit can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus.
MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT)
- Fieldbus-compatible interface unit.
- Each MG80-xx and MG80-CM system can be linked via Ethernet cable to expand the number of gauges that can be connected (see specifications for details)
MG80-CM
- Counter module for DK800S, DK and DT series (via MT13) digital gauges.
- DIN rail mount for easy installation
LZ80-K1/K2
- I/O module for MG80-EI, MG80-PN and MG80-EC.
- Equipped with 8 inputs and 8 outputs
Specifications
| Main module | ||||
|---|---|---|---|---|
| Model name | MG80-NE | MG80-EI | MG80-PN | MG80-EC |
| Commnication protocol | Ethernet (TCP/TP) 100BASE-TX |
EtherNet/IP | PROFINET | EtherCAT |
| Function | Resolution selection (0.1 to 10 µm), reference point setting, reset, preset, master preset, current value / maximum value / minimum value / P-P value output of each axis, calculation function (2-axis addition and subtraction), comparator function (Up to 8 sets of 2 or 4 steps can be set) | |||
| Transmission speed | 100 Mbit/s | |||
| Maximum connectable counter modules | 16 MG80-CM units can be connected to each MG80-NE. Up to 64 gauges can be connected (via link connection) | 16 MG80-CM units can be connected to each MG80-EI/PN. Up to 255 gauges can be connected (via link connection and fieldbus IP address configuration) | 16 MG80-CM units can be connected to each MG80-EC. Up to 65,535 gauges can be connected (via link connection) | |
| Mounting method | 35 mm DIN rail mounting | |||
| Power supply voltage | DC 10.8 to 26.4 V | |||
| Power supply voltage | 2.4 W or less | |||
| Maximum cable length* | 20 m (shielded CAT5e recommended) | |||
|
*The customer must provide the communication cables. Magnescale reserves the right to change product specifications without prior notice. |
||||
| Counter module | ||
|---|---|---|
| Model | MG80-CM | |
| Power consumption | 2.0 W or less (Measuring unit excluded) | |
| Compatible measuring units | DK800S series, DK series, DT series (via MT13) | |
| Alarm | Frequency response exceeded, Measuring unit not connected, Cable breakage | |
| I/O module* | |||
|---|---|---|---|
| Model | LZ80-K1/LZ80-K2 | ||
| Power consumption | 2.0 W or less | ||
| I/O | 9-pole connector × 2 Photo coupler insulated 8 input, 8 output LZ80-K1: Current Sink LZ80-K2: Current Source |
||
|
*Cannot connect to MG80-NE Magnescale reserves the right to change product specifications without prior notice. |
|||
Dimensions
Accessory
MG80-EI/PN/EC
I/O module
| LZ80-K1/K2 | I/O module for MG80-MA, MG80-PN, MG80-EI and MG80-EC | |
Catalog
| MG80-NE/EI/PN/EC Series | Japanese |  |
|---|---|---|
| MG80-NE/EI/PN/EC Series | English | |
| MG80-NE/EI/PN/EC Series | Deutsch | |
| MG80-NE/EI/PN/EC Series | Simplified Chinese | |