Product TOP
For measurements and control in diverse field uses. The required output board can be extended.
- Various outputs are enabled by mounting extension boards
- -BCD Output (Option)
- -Comparator Function: Relay / Open-collector (Option)
- Peak Hold Function Convenient for Statistical Measurement
- Convenient External Input Functions for Automatic Measurement
- Display Resolution Switching
- Data Storage
- Reset/Preset/Restart
- Detecting Reference Point of Measurement Unit
- Scaling
- Flicker Control
Specifications
| Specifications | ||
|---|---|---|
|
Magnescale reserves the right to change product specifications without prior notice. |
||
| Model | LY71 | |
| Specifications by application | – | |
| Number of input shafts | 1 or 2 axes (2-axis add function available; addition only is displayed when adding) | |
| Display | 7 digits and minus display, Color amber | |
| Display data | Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values | |
| Input resolution |
|
|
| Display resolution | Measuring unit input resolution or higher and supported inch units | |
| Input signal | A/B quadrature signal, Z signal (Conforms to EIA-422) | |
| Alarm display | Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data | |
| Reset | Current value reset, Alarm cancel | |
| Restart | Restart of peak value calculation for each axis/all axes | |
| Preset | It is possible to store/edit up to three values for each axis. | |
| Master calibration function | The master calibration value is relocated when going past the reference point after the power is turned on. | |
| Reference point operations | It is possible to store/edit one value for each axis (when not using the master calibration function). | |
| Hold function |
|
|
| Linear compensation | A fixed compensation amount is applied to the measuring unit’s count value. Compensation amount Standard: ±600 µm/m (Expanded: ±1000 µm/m) | |
| Scaling | 0.100000～9.999999 | |
| I/O |
|
|
| Power supply | DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22A (For U.S. only) or PSC-23A (For Europe and other countries) *Option | |
| Power consumption | MAX. 32 VA connected at the AC adaptor. | |
| Temperature | Operating : 0～40℃ (non condensing) Storage : -20～60℃ (non condensing) |
|
| Mass | Approx. 1.5kg | |
Dimensions
| Product name | 2D | 3D |
|---|---|---|
| LY71 | Download | － |
Instruction manual
| Product name | Japanese | English | Deutsch | Simplified Chinese | Traditional Chinese | |
|---|---|---|---|---|---|---|
| LY71 | install | Download | Download | Download | Download | Download |
| LY71 | operation | Download | Download | Download | Download | Download |
| LY71 | LZ71-B | Download | Download | Download | Download | Download |
| LY71 | LZ71-KR | Download | Download | Download | Download | Download |
| LY71 | SZ70-1 | Download | Download | Download | Download | － |
Setup manual
| Product name | Initial setup | Display resolution | Preset | Comparison | Angle display |
|---|---|---|---|---|---|
| LY71 | Download | Download | Download | Download | Download |
*Please contact us if you cannot download the file.
Accessory
LY71
AC Adapter
| PSC-21A | AC Adapter (AC 100V for Japan) | |
| PSC-22A | AC Adapter (AC 120V for US) | |
| PSC-23A | AC adapter (AC220 to 240V for other countries except for EU) | |
Expansion unit
| LZ71-B | BCD unit for LY71 | |
| LZ71-KR | Comparator unit for LY71 | |
Catalog
Please refer to the Digital Gauge General catalog.