Product TOP
Slim shape with stem diameter of Φ8 mm and high durability ball spline bearing.
By combining with CE34, MF10, and MG50 series (sold separately), it can be compactly connected to PLCs and other control devices.
- Measuring range: 5 mm, 12 mm, 30 mm (made to Order)
- Maximum resolution: 0.1 µm
- Accuracy: 1 µm p-p to 1.7 µm p-p (depends on the measurement range and resolution)
- Maximum response speed: 80 m/min
- Bearing structure: Improved sliding performance through the use of highly durable ball spline bearings
- High durability: 320 million sliding cycles or more (under continuous evaluation as of January 2021)
- Protection grade: IP67 (with air connected on right angle models)
- Built-in reference point
- Flange type is also available for strong fixing.
Specifications
| Specifications | ||
|---|---|---|
|
*1 Excluding the interpolation box and connector *2 When Φ4 mm tube is used in the right angle type *3 Excluding interpolation box and connector Magnescale reserves the right to change product specifications without prior notice. |
||
| Model | DF805SR, DF805SFR | DF805SLR, DF805SFLR |
| Measuring range | 5 mm | |
| Resolution | 0.1 µm | |
| Accuracy (at 20 °C) | 1 µm p-p | |
| Measuring force (at 20 °C) | Upward : 0.35 ±0.25 N | |
| Horizontal : 0.40 ±0.25 N | ||
| Downward : 0.45 ±0.25 N | ||
| Maximum response speed | 80 m/min | |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |
| Reference point response speed | 80 m/min | |
| Output | Dedicated serial communication protocol | |
| Spindle driving | Spring push | Spring push / Vacuum suction |
| Protection grade *1 | Straight type: IP67 / Right angle type: IP64 (IP67*2 ) | |
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |
| Impact resistance | 1,000 m/s2 (11 ms) | |
| Operating temperature | 0 to +50 °C (no condensation) | |
| Storage temperature | -20 to +60 °C (90 %RH or less) | |
| Power supply voltage | +10 to +30 V DC | |
| Power consumption | 1.2 W or less | |
| Mass 3 | Approx. 30 g (not including cable parts and interpolation box) | |
| Probe part cable length | 2 m | |
| Output cable length | Max. 20 m (Use the optional CE34.) | |
| Feeler | Carbide ball tip, Mount screw M2.5 | |
| Accessories | Instruction manual, wrench, hose elbow (only DF8**S*L**) tightening nut, clamp wrench, wave washer, stop pin (1 each) (only DF8**S*F**) |
|
| Specifications | ||||
|---|---|---|---|---|
|
*1 Excluding interpolation box and connector *2 When Φ4 mm tube is connected for right angle type *3 Excluding cable section and interpolation box Magnescale reserves the right to change product specifications without prior notice. |
||||
| Model | DF812SR, DF812SFR | DF812SLR, DF812SFLR | DF812SVR | |
| Measuring range | 12 mm | |||
| Resolution | 0.1 µm | |||
| Accuracy (at 20 °C) | 1 µm p-p | |||
| Measuring force (at 20 °C) | Upward : 0.4 ±0.3 N 0.6 ±0.5 N (Pneumatic push type) Horizontal : 0.5 ±0.3 N 0.7 ±0.5 N (Pneumatic push type) Downward : 0.6 ±0.3 N 0.8 ±0.5 N (Pneumatic push type) Air pressure：0.055 MPa |
|||
| Maximum response speed | 80 m/min | |||
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
| Reference point response speed | 80 m/min | |||
| Output | Dedicated serial communication protocol | |||
| Spindle driving | Spring push | Spring push / Vacuum suction | Pneumatic push | |
| Protection grade*1 | Straight type: IP67, right angle type: IP64 (IP67*2 ) | |||
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |||
| Impact resistance | 1,000 m/s2 (11 ms) | |||
| Operating temperature | 0 to +50 °C (no condensation) | |||
| Storage temperature | -20 to +60 °C (90 %RH or less) | |||
| Power supply voltage | +10 to +30 V DC | |||
| Power consumption | 1.2 W or less | |||
| Mass 3 | Approx. 30 g (not including cable parts and interpolation box) | |||
| Probe part cable length | 2 m | |||
| Output cable length | Max. 20 m (Use the optional CE34) | |||
| Feeler | Provided with a carbide ball tip Mount screw M2.5 | |||
| Accessories | Instruction Mmanual, wrench, hose elbow (only DF8**S*L**) tightening nut, clamp wrench, wave washer, stop pin (1 each) (only DF8**S*F**) |
|||
| Specifications ＊Made to Order | |||
|---|---|---|---|
|
*1 Excluding interpolation box and connector *2 Excluding cable section and interpolation box * For the output cable, use CE34 (sold separately). (Cable length: Max. 20 m) Magnescale reserves the right to change product specifications without prior notice. |
|||
| Model | DF830SLR | DF830SVR | |
| Measuring range | 30 mm | ||
| Resolution | 0.1 µm | ||
| Accuracy (at 20 °C) | 1.3 µm p-p | 1.7 µm p-p | |
| Measuring force (at 20 °C) | Upward : 0.5 ± 0.35 N Horizontal : 0.6 ± 0.35 N Downward : 0.7 ± 0.35 N |
Air presser 0.07 Mpa 1.9 N or less for all diection Air presser 0.09 Mpa 2.6 N or less for all diection |
|
| Maximum response speed | 80 m/min | ||
| Reference point | at 1 mm ±0.5 mm position of spindle movement | ||
| Reference point response speed | 80 m/min | ||
| Output | Dedicated serial communication protocol | ||
| Protection grade *1 | IP53 When using DZ830BL : IP67 |
IP53 When using DZ830BV : IP67 |
|
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | ||
| Impact resistance | 1,000 m/s2 (11 ms) | ||
| Operating temperature | 0 to +50 °C (no condensation) | ||
| Storage temperature | ‒20 to +60 °C (90 %RH or less) | ||
| Power supply voltage | DC +10 to +30 V | ||
| Power consumption | 1.2 W or less | ||
| Mass *2 | Approx. 80 g (not including cable parts and interpolation box） | ||
| Probe part cable length | 2 m | ||
| Output cable length | Max. 20 m (Use the optional CE34) | ||
| Feeler | Carbide ball tip, Mount screw M2.5 | ||
| Accessories | Instruction manual, wrench | ||
Dimensions
| Product name | 2D | 3D | |
|---|---|---|---|
| DF805S | R | Download | Download |
| DF805S | FR | Download | Download |
| DF805S | LR | Download | Download |
| DF805S | FLR | Download | Download |
| DF812S | R | Download | Download |
| DF812S | FR | Download | Download |
| DF812S | LR | Download | Download |
| DF812S | FLR | Download | Download |
| DF812S | VR | Download | Download |
| DF830S | VR | – | – |
| CE34 | Download | ||
*Please contact our sales department.
Accessory
DF805S/DF812S/DF830S
Feeler
| DZ-100 |  |
Roller feeler |
| DZ-123 |  |
Feeler (Contact point : Φ3 mm carbide ball tip) |
| DZ-191 |  |
Coupling |
| DZ-5100 |  |
Feeler set (pin, off-center, carbide flat, plastic spherical) |
Lift lever
| DZ-161 |  |
Lift lever (To allow manual sliding, this is mounted between the spindle and the feeler.) |
Gauge stand
| DZ-521 |  |
Stand for Gauge, mounting hole φ8 |
Bellows set
| DZ305 |  |
Bellows set for DF805S series |
| DZ303 |  |
Bellows set for DF812S series |
| DZ304 |  |
Bellows set for DF812SVR Series |
| DZ830BL |  |
Bellows set for DF830SLR Series |
| DZ830BV |  |
Bellows set for DF830SVR Series |
Flange Adapter
| DZ812F |  |
Flange adapter for 12 mm straight and right angle type φ8 gauge |
| DZ830F |  |
Flange adapter for DK/DF/DS 830S Series |
Output cable
| CE-34-005, 02, 05, 10, 15, 20 | MF10 connection cable for DF series (0.5, 2, 5, 10, 15, 20 m) | |
Catalog
| DF800S Series | Japanese |  |
|---|---|---|
| DF800S Series | English | |