| Model |
LY71 |
| Specifications by application |
– |
| Number of input shafts |
1 or 2 axes (2-axis add function available; addition only is displayed when adding) |
| Display |
7 digits and minus display, Color amber |
| Display data |
Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values |
| Input resolution |
- Standard : 0.1 µm, 0.5 µm, 1 µm, 5 µm, 10 µm, 1 s, 10 s, 1 min, 10 min
- Expanded : 100 µm, 50 µm, 25 µm, 20 µm, 2 µm, 0.05 µm, and 1 degree can be added.
|
| Display resolution |
Measuring unit input resolution or higher and supported inch units |
| Input signal |
A/B quadrature signal, Z signal (Conforms to EIA-422) |
| Alarm display |
Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data |
| Reset |
Current value reset, Alarm cancel |
| Restart |
Restart of peak value calculation for each axis/all axes |
| Preset |
It is possible to store/edit up to three values for each axis. |
| Master calibration function |
The master calibration value is relocated when going past the reference point after the power is turned on. |
| Reference point operations |
It is possible to store/edit one value for each axis (when not using the master calibration function). |
| Hold function |
- Selectable from latch and pause
- Latch : Display held while latched (Display hold)
- Pause : Peak calculation stopped while paused (Peak calculation hold)
|
| Linear compensation |
A fixed compensation amount is applied to the measuring unit’s count value. Compensation amount Standard: ±600 µm/m (Expanded: ±1000 µm/m) |
| Scaling |
0.100000～9.999999 |
| I/O |
- Expansion board for BCD (option:LZ71-B), available 1 or 2 pics.
- Expansion board for comparator (option:LZ71-B)
|
| Power supply |
DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22A (For U.S. only) or PSC-23A (For Europe and other countries) *Option |
| Power consumption |
MAX. 32 VA connected at the AC adaptor. |
| Temperature |
Operating : 0～40℃ (non condensing)
Storage : -20～60℃ (non condensing) |
| Mass |
Approx. 1.5kg |
