All About Automation Friedrichshafen 2024 ~ Germany
March 4, 2024
![](https://www.magnescale.com/en/wp-content/uploads/2024/03/aaa_Basislogo23_rgb-1-1024x246.png)
March 5th + 6th, 2024 at Messe Friedrichshafen, Germany
Hall B2 – 126
https://www.allaboutautomation.de/en/friedrichshafen
Exhibits shown
• µMATE+ LU20 display
High accuracy measurement in a compact form.
The digital display LU20 measurement values can be shown in different display views. The absolute measuring values can be transferred via Bluetooth.
![](https://www.magnescale.com/en/wp-content/uploads/2024/03/LU20_noabs-971x1024.png)
• DS series – Digital gauge with USB interface
Digital gauge with a resolution of 0.1 µm or 0.5 µm for direct connection to the PC or USB hub.
With the measuring lengths from 5 mm to 100 mm, the DS series is perfectly suited for a wide range of measurements during or after the machining process.
![](https://www.magnescale.com/en/wp-content/uploads/2023/07/DS800S_USB-gauge.png)
• MeasureViewer software for your DS series
Evaluate the measurements values directly on your PC.
o Multiple display possibilities: analog meter, horizontal/vertical bar graph, numerical display
o Available measurement modes: current value / MAX / MIN / P-P
o Tolerance values freely adjustable GO/NG results for current value
o Selectable display range (+/-0.05µm to +/-250mm)
o CSV data output
![](https://www.magnescale.com/en/wp-content/uploads/2023/07/1636960284421_DS_MeasureViewer-1024x717.png)
MG80 series
The MG80 modules offer high speed processing (400µs) of all axis values and calculations. Depending on the communication protocol needed, the matching module can be chosen:
Ethernet (TCP/TP) 1000BASE-TX: MG80-NE
EtherNET/IP: MG80-EI
PROFINET: MG80-PN
EtherCAT: MG80-EC
RS232C: MG80-SC
![](https://www.magnescale.com/en/wp-content/uploads/2023/09/MG80-Lineup-1024x391.png)