Product TOP
Slim shape with stem diameter of Φ8 mm and high durability ball spline bearing.
Our unique signal processing technology enables measurements that require high accuracy and real-time performance.
- Measuring range: 5 mm, 12 mm, 30 mm
- Maximum resolution: 0.1 µm, 0.5 μm
- Accuracy: 1 µm p-p to 1.7 µm p-p (Depends on the model)
- Maximum response speed: 80 m/min (resolution 0.1 µm), 250 m/min (resolution 0.5 µm)
- Bearing structure: Improved sliding performance through the use of highly durable ball spline bearings
- High durability: 320 million sliding cycles or more (under continuous evaluation as of January 2021)
- Protection grade: IP67 (straight type / right angle type with air tube)
- Built-in reference point
- Output signal: A/B/reference point (Voltage-differential line driver output)
- Flange type is also available for strong fixing.
Specifications
| Specifications | ||
|---|---|---|
|
*1 Values in parentheses show those of type B. *2 Excluding the interpolation box and connector *3 When Φ4 mm tube is used in the right angle type *4 Excluding interpolation box and connector *5 There are some differences in the shape and dimensions from the previous DK800 series models. Magnescale reserves the right to change product specifications without prior notice. |
||
| Model | High resolution model | General purpose resolution model |
| DK805SAR, DK805SALR, DK805SAFR, DK805SAFLR, DK805SBR, DK805SBLR, DK805SBFR, DK805SBFLR | DK805SAR5, DK805SALR5, DK805SAFR5, DK805SAFLR5, DK805SBR5, DK805SBLR5, DK805SBFR5, DK805SBFLR5 | |
| Measuring range | 5 mm | |
| Maximum resolution | 0.1 µm | 0.5 µm |
| Accuracy (at 20 °C) |
1 µm p-p | 1.5 µm p-p |
| Measuring force (at 20 °C) |
Upward: 0.35 ±0.25 N | |
| Horizontal: 0.40 ±0.25 N | ||
| Downward: 0.45 ±0.25 N | ||
| Operating temperature | 0 to +50 °C (no condensation) | |
| Storage temperature | -20 to +60 °C (90 %RH or less) | |
| Maximum response speed *1 | 80 m/min (42 m/min) | 250 m/min (100 m/min) |
| Spindle driving | Spring push (All model) Air drive by vacuum suction is possible (DK805S*LR*) | |
| Reference point response speed | Same as maximum response speed noted above | |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |
| Protection grade *2 | Straight type: IP67 / Right angle type: IP64 (IP67*3 ) | |
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |
| Impact resistance | 1,000 m/s2 (11 ms) | |
| Power supply | DC 5 V ±5 % | |
| Power consumption | 1 W | |
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |
| Mass*4 | Approx. 30 g | |
| Feeler | Carbide ball tip, mounting screw M2.5 | Steel ball tip, mounting screw M2.5 |
| Output cable length | 2.5 m | |
| Accessories | Instruction manual, +P M4 x 5 screws (2 pc), tightening nut, clamp spanner, wave washer, mounting pins 1 each (for DK8**S*F** only), hose elbow (for DK8**S*L** only), spanner, supplement |
|
| Specifications | ||||
|---|---|---|---|---|
|
*1 Excluding interpolation box and connector *2 When Φ4 mm tube is connected for right angle type *3 Excluding cable section and interpolation box Magnescale reserves the right to change product specifications without prior notice. |
||||
| Model | High resolution models | General purpose resolution models | ||
| DK812SAR DK812SALR DK812SAFR DK812SAFLR DK812SAVR |
DK812SBR DK812SBLR DK812SBFR DK812SBFLR DK812SBVR |
DK812SAR5 DK812SALR5 DK812SAFR5 DK812SAFLR5 DK812SAVR5 |
DK812SBR5 DK812SBLR5 DK812SBFR5 DK812SBFLR5 DK812SBVR5 |
|
| Measuring range | 12 mm | |||
| Maximum resolution | 0.1 µm | 0.5 µm | ||
| Accuracy (at 20 °C) |
1 µm p-p | 1.5 µm p-p | ||
| Measuring force (at 20 °C) |
Upward: 0.4 ±0.3 N 0.6 ±0.5 N (Pneumatic push type) Horizontal: 0.5 ±0.3 N 0.7 ±0.5 N (Pneumatic push type) Downward: 0.6 ±0.3 N 0.8± 0.5 N (Pneumatic push type) Pneumatic push: 0.055 MPa |
|||
| Maximum response speed | 80 m/min | 42 m/min | 250 m/min | 100 m/min |
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
| Reference point response speed | Same as maximum response speed noted above | |||
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) |
|||
| Spindle driving | Spring push（DK812SAR/SAFR/SBR/SBFR/SAR5/SAFR5/SBR5/SBFR5） Pneumatic push (DK812SAVR/SBVR/SAVR5/SBVR5) Spring push / Vacuum suction (DK812SALR/SAFLR/SBLR/SBFLR/SALR5/ SAFLR5/SBLR5/SBFLR5) |
|||
| Protection grade*1 | Straight type: IP67, right angle type: IP64 (IP67*2) | |||
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |||
| Impact resistance | 1,000 m/s2 (11 ms) | |||
| Operating temperature | 0 to +50 °C (no condensation) | |||
| Storage temperature | −20 to +60 °C (90 %RH or less) | |||
| Power supply | 5 VDC ±5 % | |||
| Power consumption | 1 W | |||
| Mass*3 | Approx. 30 g | |||
| Output cable length | 2.5 m | |||
| Feeler | Carbide ball tip, Mounting screw M2.5 | Steel ball tip, Mounting screw M2.5 | ||
| Accessories | Instruction manual, +P M4 × 5 screw (2 pc), tightening nut, clamp spanner, wave washer, mounting pin 1 each (DK8**S*F** only), hose elbow (DK8**S*L** only), spanner |
|||
| Specifications | ||||
|---|---|---|---|---|
|
*1 Excluding interpolation box and connector *2 When using the Bellows Set (optional accessory) *3 Excluding cable section and interpolation box Magnescale reserves the right to change product specifications without prior notice. |
||||
| Model | DK830SR | DK830SLR | DK830SVR | |
| Measuring range | 30 mm | |||
| Maximum resolution | 0.1 µm | |||
| Accuracy (at 20 °C) |
1.3 µm p-p | 1.7 µm p-p | ||
| Measuring force (at 20 °C) |
|
|
||
| Operating temperature | 0 to +50 °C (no condensation) | |||
| Storage temperature | -20 to +60 °C (90 %RH or less) | |||
| Maximum response speed | 80 m/min | |||
| Reference point response speed | 80 m/min | |||
| Spindle driving | Spring push | Pneumatic push | ||
| Reference point | at 1 mm ±0.5 mm position of spindle movement | |||
| Protection grade *1 | IP53 | IP53/IP67 *2 | ||
| Vibration resistance | 100 m/s2 (20 to 2,000 Hz) | |||
| Impact resistance | 1,000 m/s2 (11 ms) | |||
| Stem diameter | Φ8 mm | |||
| Feeler | Carbide ball tip, mounting screw M2.5 | |||
| Power supply | DC 5 V ±5 % | |||
| Power consumption | 1 W | |||
| Mass *3 | Approx. 70 g | Approx. 80 g | ||
| Output | A/B/reference point, voltage-differential line driver output (conforming to EIA-422) | |||
| Output cable length | 2.5 m | |||
| Accessories | Spanner, instruction manual, supplement, +P M4 x 5 screws (2pc) | |||
Dimensions
| Product name | 2D | 3D | |
|---|---|---|---|
| DK805SA/B | R | Download | Download |
| DK805SA/B | LR | Download | Download |
| DK805SA/B | FR | Download | Download |
| DK805SA/B | FLR | Download | Download |
| DK812SA/B | R | Download | Download |
| DK812SA/B | LR | Download | Download |
| DK812SA/B | FR | Download | Download |
| DK812SA/B | FLR | Download | Download |
| DK812SA/B | VR | Download | Download |
| DK830S | R | Download | Download |
| DK830S | LR | Download | Download |
| DK830S | VR | Download | Download |
Instruction manual
| Product name | Japanese | English | Deutsch | Simplified Chinese | Traditional Chinese | |
|---|---|---|---|---|---|---|
| DK805S / DK812S | AR/BR ALR/BLR |
Download | Download | Download | Download | Download |
| DK805S / DK812S | AFR/BFR AFLR/BFLR |
Download | Download | Download | Download | Download |
| DK812S | AVR/BVR | Download | Download | Download | Download | Download |
| DK830S | Download | Download | Download | Download | Download | |
Accessory
DK805S/DK812S/DK830S
Feeler
| DZ-100 |  |
Roller feeler |
| DZ-123 |  |
Φ3 mm carbide ball tip |
| DZ-191 |  |
Coupling |
| DZ-5100 |  |
Feeler set (pin, off-center, carbide flat, plastic spherical) |
Lift lever
| DZ-161 |  |
Lift lever (To allow manual sliding, this is mounted between the spindle and the feeler.) |
Gauge stand
| DZ521 |  |
Stand for GaugeGauge, mounting hole φ8 |
Bellows set
| DZ305 |  |
Bellows set for DK805S series |
| DZ303 |  |
Bellows set for DK812S Series |
| DZ304 |  |
Bellows set for DK812SVR Series |
| DZ830BL |  |
Bellows set for DK830SLR Series |
| DZ830BV |  |
Bellows set for DK830SVR Series |
Flange Adapter
| DZ812F |  |
Flange adapter for 12 mm straight and right angle type φ8 gauge |
| DZ830F |  |
Flange adapter for 30 mm straight and right angle type φ8 gauge |
Extension cable
| CE08-1,3,5,10,15 | Extension cable for LT series / MG series (1,3, 5, 10, 15 m) | |
| CK-T12,13,14,15,16 | Flex-resistant extension cable for LT series / MG series (1, 3, 5, 10, 15 m) | |
| CE29-003,01,03,05,10 | Extension cable for LY series counter (0.3, 1, 3, 5, 10 m) | |
| CE22-01,03,05,10 | Flex-resistant extension cable for bare wires (1, 3, 5, 10 m) | |
Special specification products
For DK805S/DK812S
Special specification products are available as shown in the table below.
Special specification products are available as shown in the table below.
| Maximum response speed (m/min) | ||||||
|---|---|---|---|---|---|---|
|
(Note) : There is no reference point output for the 10 µm resolution model. |
||||||
| A/B quadrature Frequency | 5.0 MHz | 2.5 MHz | 1.25 MHz | 0.8 MHz | 0.5 MHz | |
| A/B quadrature Minimum phase difference | 50 ns | 100 ns | 200 ns | 300 ns | 500 ns | |
| Resolution | 0.1 µm | 80 (standard) | 42 (standard) | – | – | – |
| 0.5 µm | 250 (standard) | 100 (standard) | 60 | 33 | 20 | |
| 1 µm | – | 200 | 120 | 66 | 40 | |
| 2 µm | – | – | 200 | – | – | |
| 5 µm | – | – | 250 | – | – | |
| 10 µm | – | – | 250(Note) | – | – | |
For DK830S
Special specification products are available as shown in the table below.
Special specification products are available as shown in the table below.
| Maximum response speed (m/min) | |||||
|---|---|---|---|---|---|
| A/B quadrature Frequency | 5.0 MHz | 2.5 MHz | 0.8 MHz | 0.5 MHz | |
| A/B quadrature Minimum phase difference | 50 ns | 100 ns | 300 ns | 500 ns | |
| Resolution | 0.1 µm | 80 (standard) | 42 (standard) | 14 | – |
| 0.5 µm | 250 | 100 | 33 | – | |
| 1 µm | – | 200 | 66 | 40 | |
Catalog
Please refer to the Digital Gauge General catalog.