|
High accuracy non-contact magnetic switch
- SET-P15 can be used as a zero point for the DIGIRULER® (detector PL23) or as a limit switch.
- SET-P16 can be used as a zero point for the DIGIRULER® (Interpolator MJ100/110).
- Excellent resistance to workshop conditions.
- Resistant to oil, dirt, vibrations and shocks.
- High accuracy: ± 3 µm
- Max. response frequency; 10 kHz
- Built-in circuit for direct connection to a control unit (SET-P15).
- Indication lamp (LED) for visual confirmation that the switching action is being made.
Specifications
| Model |
PK15
|
PK16
|
|
-1
|
-2
|
-3
|
-1
|
| Repeatability |
± 3 µm (under same circumstance)
|
| Operating range |
7.5 ± 2 mm/ 0.29" ± 0.07" (at 1 mm clearance)
|
| Clearance |
Max. 3 mm/ 0.11"
|
| Max. response frequency |
10 kHz
|
| Output |
Circuit |
NPN transistor, open collector
|
| Operation |
Turns ON in proximidity
|
| Contact capacity |
Max. current 30 mA, max.voltage 30 V
|
| Residual voltage |
Max. 0.4 V, with 30 mA
|
| Protection circuit |
Surge killer; protection against reversed polarity
|
| Indication lamp |
LED turns on, when activated
|
| Power supply |
+5 V DC ± 10%
|
+ 12 V DC ± 10%
|
+24 V DC ± 10%
|
+ 5 V DC ± 10%
|
| Power consumption |
Max. 10 mA
|
| Protective design grade |
Equivalent to IP67
|
| Insulation resistance |
10Mω (250 V DC)
|
| Vibration resistance |
49 m/s², 0 to 500 Hz
|
| Shock resistance |
980 m/s²
|
| Operating temperature |
-10°C to 60°C/ 14° F to 140° F
|
| Storage temperature |
-20°C to 80°C/ -4°F to 176° F
|
| Cable length |
1.5 m/ 4.9′ (extendable up to 30 m/ 98.4*)
|
|
