Non-contact detection
Magnetic detection system for excellent resistance to dust, oil, vibrations and shocks
Detects linear position and displacement and produces analog signal output when connected to the SL700 Series. Produces A/B phase signal when connected to MJ500/600 Series interpolator
A wide range of models is available so you can select the best model for your specific application

Specifications

Model		PL101-N	PL101-R	PL101-RH
Protective grade		Equivalent to IP50		Equivalent to IP67 (Detector only)
Reference point detection function		No	Available
Resolution (Connected to MJ600/620)		1, 2, 5, 10, 20, 25 µm (MJ620), 1 µm (MJ600), 2, 10 µm (MJ500)
Accuracy		±10 µm When used with SL700 series: Accuracy at 20 °C per 1 m as measured before shipment
Clearance		0.35 ± 0.1 mm
Offset		± 0.2 mm
Attitude change	Pitch	± 0.1°
	Yaw	± 0.2°
	Roll	± 0.2°
Output signal		1 Vp-p Analog output
Power supply voltage		DC 5V ± 5%
Power consumption		Max. 150 mA (0.8W)
Max. response speed		6.4 m/s
Cable length		300 mm		3000 mm
Mass		60 g		150 g
Operating temperature		0 to 45 °C
Storage temperature		-20 to 50 °C
Standard compliance		EMI: EN55011 Group 1 Class A EMS: EN50082-2 FCC Part 15 Subpart B Class A ICES-003 CLASS A DIGITAL DEVACE
Extension cable (Option)		CK-T12 1 m CK-T13 3 m CK-T14 5 m CK-T15 10 m (By extension cable, it can be extended up to Max 10 m)