The "MG" Series is a modular gauging system that allows for flexible, multi-point measuring, with built-in software for today's most popular output protocols. Because of its modular construction, the "MG" system can be easily mounted to a standard DIN rail (35mm), requires minimal wiring, and can be easily expanded for future upgrades.
Up to 64 connectable gauges
Input resolutions: 0.1µm, 0.5µm, 1µm, 5µm, and 10µm.
Compatible with RS-232C, BCD
Operating voltage: 12-24VDC
DIN rail mounting (35mm)
Main Module
Model
MG10-P1
MG10-P2
Power source
Supply voltage
DC12-24V(11-26.4V) Min startup time: 100ms or less
Power consumption
2.0W + total power consumption for connected modules
Inrush current (10ms)
10A or less (when maximum number of modules are connected)
reset, pause, start, latching, and data out trigger to whole channels
Output signal
intergrated alarm
Connectable modules
Counter modules
MG20-DK, MG20-DG, and MG-20DT (available for mixed use, up to 16 modules)
Interface modules
MG30-B1, MG30-B2
Counter Module
Model
MG20-DK
MG20-DG
MG20-DT
Power Consumption
1W + power consumption for connected gauge
1.4W (connected to DG-B) / 0.5W (connected to DL-B)
0.8W
Measuring unit input
Corresponding gauge
DK series (A/B quadrature input)
DG-B series, DL-B/ DL-BR series
DT series
Allowable response speed
10 / 5 / 1 / 0.5 / 0.1 &mirco;m;
10 / 5 / 0.5 µm
5µm (DT12/32) 1µm(DT512)
Set with DIP switch
Maximum response speed
Subject to the specification of the connected gauge
1 m/s
Reference point
REF-LED (reference point loaded) shows on the display after the reference point is detected. Set "0" to preset value on the counter when the reference point is detected
-
Others
Alarm
S-ALM LED activates by excess speed / acceleration of measuring unit, C-ALM LED activates by excess speed of the internal circuit of counter.
Alarm display is cancelled by reset command from MG10 or with the reset button of main unit
