| Model |
LY72
|
| Specifications by application |
Applications as gauge (set axis labels A, B and C)
|
Applications as scale (set axis labels X, Y and Z
|
| Display |
7 digits and minus display, color amber
|
| Number of connectable axes |
1 to 3 axis
|
| Display data |
Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values
|
Current (1st axis, 3rd axis, addition axis)
|
| Measuring unit input resolution |
Standard: 0.1µm, 0.5µm, 1µm, 5µm, 10µm, 1s, 10s, 1min, 10min
Expanded: 100µm, 50µm, 25µm, 20µm, 2µm, 0.5µm, and 1 can be added
|
| Input signal |
A/C quadrature signal, Z signal (Confroms to EIA-422)
|
| Display resolution |
Measuring unit input resolution or higher and supported inch units
Inch Basic: 0.000005", 0.00001", 0.00005", 0.0002", 0.0005"
Inch: Expanded: 0.000002", 0.0001", 0.001", 0.002", 0.005"
|
| Minimum input phase difference |
100ns
|
| Alarm display |
Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data
|
| Reset |
Current value reset, Alarm cancel
|
| Restart |
Restart of peak value calculation for each axis / all axes
|
-
|
| Preset |
It is possible to store / edit up to three values for each axis.
|
| Master calibration function |
The master calibration value is relocated when going past the reference calibration reference point point after the power is turned on.
|
-
|
| Datum point operations |
It is possible to store/edit one value for each axis (when not using the point master calibration function).
|
| Reference point operations |
It is possible to store/edit one value for each axis (when not using the point operations master calibration function).
|
| Hold function |
Selectable from latch and pause
Latch: Display held while latched (display hold)
Pause: Peak calculation stopped while pasued (Peak calculation hold)
|
Display hold
|
| Linear compensation |
A fixed compensation amount is applied to the measuring unit's count value. Compensation amount standard ±600µm/m (Expanded: ±100µm/m)
|
| Scaling |
Scaling factor: 0.100000 to 9.999999
|
| RS232C |
Data format: All axes on same line / New line for each axis Peak-to-peak value
Transfer rate: 38400/19200/9600/4800/2400/1200 bps
Parity: None / Odd / Even
Stop bit: 1 or 2
Data length: 8 bits or 7 bits
|
| Timer |
Off / 0.2 / 0.5 / 1 / 5 / 10 / 30 / 60 / 300 seconds
|
-
|
| Output data selection |
Current value / Maximum value / Minimum value
|
Current Value
|
| Power supply |
DC 12V Rating 0.75A Max, 1A AC 100V to 240V ±10% When using the AC adaptor PSC-22 (For US Only) or PSC-23 (For Europe and other countries)
|
| Power consumption |
MAX. 32VA connected at the AC adaptor
|
| Operating temperature |
0 to 40 °C (no condensation)
|
| Storage temperature |
-20 to 60 °C (no condensation)
|
| Mass |
Approx. 1.5kg
|
