| Model |
LY71
|
| Display |
7 digits and minus display, color amber
|
| Number of connectable axes |
1 or 2 axes (2-axis function available: addition only is displayed when adding)
|
| Display data |
Current (1st axis, 2nd axis, additiona axis), maximum, minimum, and peak-to-peak values
|
| Measuring unit input resolution |
Standard: 0.1µm, 0.5µm, 1µm, 5µm, 10µm, 1 s, 10 s, 1 min, 10 min
Expanded: 100µm, 5Oµm, 25µm, 20µm, 2µm, 0.05µm, and 1 can be added.
|
| Input signal |
AlB quadrature signal, Z signal (Confonns to EIA.-4221
|
| Display resolution |
Measuring unit input resolution or higher and supported inch units
Inch: Basic: 0.000005"", 0.00001"", 0.00006"", 0.0002"", 0.0006""
Inch: Expanded: 0.00002"", 0.0001"", 0.001"", 0.002"", 0.006""
|
| Minimum input phase difference |
100 ns
|
| Alarm display |
Meesuing unit disconnected, Excess speed, Maximumm display amount exceeded, Powar failure, Error in stored data
|
| Reset |
Current value reset, Alarm cancel
|
| Restart |
Restart of peak value calculation for each axls/all axes
|
| Preset |
It is possible to store/edit up to three values for each axis.
|
| Master calibration function |
The master calibration value is relocated when going past the reference calibration reference point point after the power is turned on
|
| Datum point operations |
It is possble 10 store/edit one value for each axis (when not using the point master calibration function).
|
| Reference point operations |
It is possible to store/edit one value for each axis (when not using the point operations master calibration function).
|
| Hold function |
Selectable from latch and pause
Latch: Display held while latched (Display hold)
Pause: Peak calculation stopped while paused (Peak calculation hold)
|
| Linear compensation |
"A fixed compensation amount is applied to the measuring unit's count value. Compensation amount Standard: ±600µm/m (Expanded: ±1000µm/m)"
|
| Scaling |
Scaling factor: 0.100000 to 9.999999
|
| Power supply |
DC 12V Rating, 0.75A Max, 1A AC 100V to 240V ±10% when using the AC adaptor PSC-22 (For US Only) or PSC-23 (For Europe and other countries)
|
| Power consumption |
MAX, 32VA connected at the AC adaptor
|
| Operating temperature |
0 to 40 °C (no condensation)
|
| Storage Temperature |
-20 to °60 C (no condensation)
|
| Mass |
Approx. 1.5kg
|
