Back
DG-M/E Type
Download DG-M/E Type Spec Sheet
For automatic inspection / measurement in production line
A/B quadrature signal output with differential line driver
Highly reliable Magnescale® principle
Two types of power supply voltage + 5V DC and +12 to +24V DC
Compact design (outside diamter ø 8 mm: DG805/810) and a line up to cover a wide measuring range (5 mm to 205 mm)
Specifications (Gauges)
Model
DG805 BLM/BLE FLM/FLE
DG810 BM/BE FM/FE
DG810 BLM/BLE FLM/FLE
DG10 BPM/BPE
DG10 BSM/BSE
DG10 BNM/BNE
DG25 BPM/BPE
DG25 BSM/BSE
DG25 BNM/BNE
DG25 BLM/BLE
Measuring length L mm (inch)
5.2mm
10 mm
25 mm
Resolution
0.5/ (1)/ (2)/ (5)/ (10) µm (Switch-selectable)
Accuracy (at 20 °C /68 °F)
±1 µm
Measuring force(at 20 °C /68 °F)
Upward
0.35 ± 0.25N
0.4 ± 0.3N
All directions 4.9 N or less
0.3 ± 0.25N
All directions 4.9 N or less
0.4 ± 0.3N
Lateral
0.40 ± 0.25N
0.5 ± 0.3N
0.6 ± 0.3N
0.7 ± 0.35N
Downward
0.45 ± 0.25N
0.6 ± 0.3N
0.8 ± 0.35N
1 ± 0.4N
Protection grade
-
IP64 Equivalent
-
IP64 Equivalent
-
Mounting stem diameter
ø 8 (0/ -0.009 mm)/ ø 0.31"(+0/ -0.0004")
ø 20(0/ -0.013 mm)/ ø 0.79"(+0/ -0.0005")
Lift lever
N/A
N/A
DZ161 (Option)
N/A
N/A
Air lifter
DZ801 (Option) Note 1
N/A
DZ801 (Option) Note 1
DZ174-010 (Option) Note 1
DZ174-025 (Option) Note 1
Cable length
5 m/ 16.4"
Operating temperature
0 to 50 °C / 32 °F to 122 °F
Storage temperature
20 to 60 °C / 4 °F to 140 °F
Feeler
Feeler ø 3mm carbide ball with M2.5 x 0.45
screw on fitting end (DZ123)
Feeler ø 2.5 mm carbide ball with M2.5 x 0.45 screw on fitting end (DZ122)
Mass (excl. cable unit)
20g
40g
100g
200g
Specifications (Gauges)
Model
DG50 BPM/BPE
DG50 BNM/BNE
DG100 BPM/BPE
DG100 DNM/DNE
DG110 BM/BE
DG155 BPM/BPE
DG205 BPM/BPE
Measuring length L mm (inch)
50 mm
100 mm
110 mm
155 mm
205 mm
Resolution
0.5/ (1)/ (2)/ (5)/ (10) µm (Switch-selectable)
Accuracy (at 20 °C /68 °F)
± 1 µm
± 2 µm
± 2.5 µm
± 3 µm
Measuring force (at 20 °C /68 °F)
Upward
All directions 6.2 N or less
-
All directions 9.3N or less
-
-
Resistance against slip: 2.7N (Do not have an internal spring)
Lateral
0.9 ± 0.4N
1.8 ± 0.65N
-
Downward
1.3 ± 0.5N
2.7 ± 0.55N
1.55 ± 0.15N (Note2)
Protection grade
IP64 equivalent
-
IP64 equivalent
-
-
IP64 equivalent
Mounting stem diameter
ø 20 (+0/-0.013 mm) / ø 0.79" (+0/ -0.0005")
ø 20 (+0/-0.03 mm)
ø 32 (+0/ -0.05 mm)
Lift lever
N/A
DZ161 (Option)
N/A
DZ161 (Option)
DZ161 (Included)
DZ161 (Option)
Air lifter
DZ174-050 (Option) Note 1
N/A
N/A
Cable length
5m/ 16.4'
2 m/ 6.56'
5 m/ 16.4'
Operating temperature
0 to 50 °C / 32 °F to 122 °F
Storage temperature
-20 to 60 °C / -4 °F to 140 °F
Feeler
Feeler tipped with ø 2.5 mm carbide ball with
M2.5 x 0.45 screw on fitting end (DZ122)
Feeler tipped with ø 2.5 mm carbide ball with M2.5 x 0.45 screw on fitting end (DZ121)
-
Magnetic feeler
N/A
DZ181 (Included) Attraction force : 10N
Mass (excl. cable unit)
350 g
600 g
1150 g
1100 g
1300 g
Specifications (Interpolator)
Model
DG-M
DG-E
Power supply voltage
DC 5 V ± 5 % (Corresspond to
remote sensing function)
DC 11 V to 28 V (Corresspond to remote sensing function)
Power consumption
300 mA (Maximum)
150 mA (Maximum)
Output interface
Based on EIA-422 (Line driver:AM 26C31 or equivalent)
Output signal
A/B quadrature signal
Resolution
0.5,1,2,5,10 µm (0.000025",0.0005",0.0001",0.00025",0.0005") selectable
Maximum response speed
1 m/s
Minimum phase difference
200 ns
Alarn
A/B quadrature output of this probe turns to high impedance
Output connector
MDR10214-52A2JL (3M)
Dimensions
125 x 28 x 28 (mm) (not including projecting parts)
Operating temperature
0 to 40/ 32 °F to 104 °F
Storage temperature
-20 to 60/ -4 °F to 140 °F
Mass (excl. cable and gauge part)
150 g
