| |
| |
|
|
| Back |
| |
| SET-B3/SET-K2 |
| |
 |
| |
| Download SET-B3/SET-K2 Spec Sheet |
| |
|
High accuracy non-contact Magnesensor and Magneswitch
- Magnesensor SET-B3 can be used as a zero point or to detect small displacements.
- Magneswitch SET-K2 can be used as a zero point for Magnescale and rotary encoders.
- Excellent resistance to workshop conditions.
- Compact and lightweight. Non-contact design.
- Repeatability: ± 1 µm
- Max response frequency: 1.7 kHz
- Output signal: analog (Set B3) / pulse (Set K2)
- Power supply: +12 V DC
Specifications
| Model |
Magnesensor SET-B3
|
Magneswitch SET-K2
|
| Repeatability |
±1 µm (under same conditions)
|
| Operating range |
|
8 ±1 mm/ 0.31 ± 0.04" (at 0.5 mm/ 0.019" clearance)
|
| Clearance |
Max. 2.5 mm/ 0.11"
|
Max. 3 mm/ 0.09"
|
| Max. response frequency |
1.7 kHz
|
max.delay: 0.1 ms
|
| Power supply |
+12 V DC ± 5%
|
+12 V DC ±10%
|
| Power consumption |
Max. 40 mA
|
Max. 20 mA
|
| Output impedance |
3 kω
|
12 kω
|
| Temperature characteristics |
0.3 µm/ °C (zero drift)
|
0.8 µm/ °C
|
| Voltage characteristics |
0.2 µm or less/ % (zero drift)
|
8 µm/ V
|
| Operating temperature |
-10°C to 50°C/ 14°F to 122°F
|
| Cable length (sensor) |
3 m/ 9.8' (extendable up to 15 m/ 49.2' by MSK-5000)
|
3 m/ 9.8' (extendable up to 30 m/ 98' by MSK-5000)
|
| Cable length (detector) |
Max. 100 m/ 328.0' by MSK-5100
|
Max. 20 m/ 65.6' by MSK-5100
|
|
|
|
| |
