Basic: The above and their diamter displays
0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", and their diameter displays
Expanded: The above and their diamter displays
0.000002", 0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", 0.001", 0.002", 0.005 and their diameter displays
Input signal
A/B Quadrature signal, Z signal (Equivalent with RS-422)
Mh. phase input difference
100ns
Alarm display
Scale disconnected / Excess speed / Data Overflow / Power failure / Error in stored data
Preset/Recall function
3 items
Mulit datum point
10
150
Tool offsets (for Lathe)
-
12
-
99
Axis Summing
-
Same as LH71
-
Sum of 2 axes
Display Hold
-
Same as LH71
-
The displayed value can be held and the datum entered
Ref. point function
The absolute zero point can be detected and the datum point can be re-established. (Requires a scale with a reference point)
Bolt hole circle
-
Same as LH71
-
Input diamter, start angle, stop angle, No. of holes
Radius cutting function
-
Same as LH71
-
Input radius, Tool diameter, feed angle
Data storage
Stores the value dispalyed before power loss and the last preset datum
Max. linear error compensation
±600µm/m
Counter Specifications
Model Name
LH70-1
LH70-2
LH70-3
LH71-1
LH71-2
LH71-3
Item
Segmented Error Compensation
-
32 sectors max. (Requires a scale with a reference point)
Line Hole Function
-
Input angle, number of holes and patch of the holes
Scaling Function
-
0.100000 to 9.999999
Program Function
-
Coordinates of datum points can be programmed via:
1. Manual programming by the keypad
2. Automatic programming while machining
3. Mirro image function when the program is executed.
4. Canned cycles (Bolt hole, Line hole, ARC) can be inserted into the program
Angle Display Function
-
Angle value displayed when using the Digirule scale and entering the diameter and signal resolution.
Power Save Function
LED display turns off after a user-definable period of time
Navigation Function
Status and Navigation LED's
Power Supply
12VDC
100 to 240VAC±10% (When using AC adaptor)
Power Consumtion
Max. 25VA (connected at AC power supply)
Operating Temperature
0 to 40°C (no condensation)
Storage Temperature
-20 to 60°C (no condensation)
Mass
Approx 1.5kg
AC Adaptor
Model Name
PSC-21
PSC-22
PSC-23
Item
Input Voltage
100 to 240VAC±10%
Output Voltage
12VDC
Destination
For Japan Only*
For U.S.A only*
For Europe and other countries
Phone: 281-565-8600 | Fax: 281-565-8601
Copyright 1997-2010 Industeq®. All Rights Reserved
